Jigs, Fixtures & Guides

Save time, effort and money Get things straight with the UJK ProGrip Clamps! If you carry out repetitive work, UJK ProGrip Clamps will save you time, effort and money. Easy to use, simply clamp onto a workpiece and guide your power tool to create...

GRC-12: A Better Way to Connect Guide Rails Watch this video to see how the GRC-12 auto-aligns and secures two guide rails at the same time, while eliminating the need for expensive straight-edges. Another TSO innovation, the GRC-12 is a...

GRE-13 Guide Rail ExtensionExtend Your Guide Rails for 48" Cross Cuts Watch this video to see how you can stretch your guide rail for increased safety and cut quality! Cutting across a 4x8-foot workpiece with the common 55" (1,400mm) guide rail leaves...

BigFoot™ DBF-45 v2.0Base System for Festool® DOMINO DF500 & DF700XL New! Wide area face mortising with auxiliary fence mounting provisions. Incorporating feedback from the TSO user community, the new BigFoot™ DBF-45 v2.0 base system...

UJK Parf Guide System MK II Create your own custom 20mm worktops in record time For an excellent tutorial, read How to Build a Power Tool Table from Axminster Tools & Machinery. Good news: the UJK Parf Dust Port is now included as standard with each...

Two tools in one, for crafting 20mm worktops The Parf System relies on the fine tolerance fit between the dog holes and the dogs—neither too tight or too loose. Changes in humidity can make it difficult to insert or remove 20mm dogs. Machined from...

Designed and intended for use on MDF and HDF material; not recommended for hardwood veneer plywood. UJK Parf Chamfer Tool Enables full use of the Parf Super Dog, plus helps protect your 20mm worktop holes This specially designed chamfer cutter tool...

No place for a drill press? The UJK Drill Guide provides extra stability and accuracy when you need to drill straight or at an angle. The beauty of the system is you can take your cordless drill and convert it to the near perfect accuracy of a drill...

Build Custom Worktops & Jigs This multifunctional section of aluminum T-Track can be utilized for a wide range of work holding jigs and worktops. They come pre-drilled with countersunk holes for easy installation, and each track is anodized to help...

This product adapts Makita compact routers for use with Festool's LR 32 Hole Drilling System. To make use of this adapter kit, you will need a compatible Makita compact router with plunge base, an 8mm collet, the Festool LR 32-SYS Hole Drilling Set...

This product adapts DeWalt compact routers for use with Festool's LR 32 Hole Drilling System. To make use of this adapter kit, you will need a compatible DeWalt compact router with plunge base, an 8mm collet, the Festool LR 32-SYS Hole Drilling Set...

Unrivalled Functionality and Precision This innovative product allows you to cut grooves, dados (both through or stopped) and rectangular cutouts. Designed for use with a UJK ProGrip Clamp, this beautifully engineered router jig offers far greater...

Don't forget to add the Leigh Guide Bushing Adapter compatible with your router. Six joints, unrivalled accuracy It's hard to beat the strength and beauty of a precise, hand-cut dovetail joint. However, the process of keying and fine-tuning dovetail...

NOTE: This reamer requires a drill with a 3/8" chuck. The beauty of the Parf system lies in its accuracy, in particular the close fit of Parf dogs and accessories in the 20mm dog holes. Depending on the material chosen for the bench top, sometimes a...

UJK Parf Revision Dogs Expand an existing Parf grid pattern Watch the Parf Revision Dogs video to see how these dogs can be used to expand an existing multifunction table grid pattern. The Parf Revision Dogs are a set of three specialized aluminum dogs...

Good news: the UJK Parf Dust Port is now included as standard with each UJK Parf Guide Drilling System Mark II. There is no need to order it separately. The UJK Technology Parf Dust Port firmly attaches to the Parf Guide Block (part B). This...

This cutter bores an exact 20mm hole as required by the Parf Guide System. The distinctive design ensures an exceptionally clean hole. This 20mm cutter & split stop collar will help you produce dozens of Parf Guide bench tops. It has tungsten...

These are the 3mm guide pins as supplied with the original UJK Parf Guide System and the UJK Parf Guide System Mark II. They are used to accurately locate the UJK Parf Guide Sticks when carrying the preliminary drilling for the grid of holes when...

If you own an earlier TPG System T-track that does not feature accessory mounting holes, order this T-track accessory. You can utilize this drill fixture to accurately position and drill holes to accept the TPG T-track Connector...

Use Festool drill bits in your Makita compact router This high quality 8mm collet fits into Makita Compact Routers (models RT700C, RT0700CX3, RT0701C, RP0900K, 3621, 3621A) and enables use of Festool's 5mm brad-point dowel drilling bits (491066 for...

Use Festool drill bits in your DeWalt compact router This high quality 8mm collet fits into DeWalt Compact Routers (models DWP611, DWP611PK, DCW600B) and enables use of Festool's 5mm brad-point dowel drilling bits (491066 for standard stopped shelf pin...