A new, innovative take on the familiar 20mm bench dog
Click here for a detailed walkthrough of our bench dog family, including our Chamfer Dogs. Hans goes through their key features and use cases so you can pick the right dog for your work.
Bench dogs are a great, economical way to position workpieces on your 20mm hole patterned worktop for accurate and repeatable results. While traditional bench dogs rely on an enlarged collar resting above the work surface and are suitable for a wide variety of applications, our new Chamfer Dogs have a few new tricks up their sleeve:
Thanks to their precision machined chamfer detail, these dogs self-square and self-center within their holes. Even if the dog hole is slightly oversized or worn through extended use, Chamfer Dogs will rest in the same center position, every time. This makes Chamfer Dogs the best choice when maximum layout accuracy is required.
With no above-the-worktop collar, Chamfer Dogs present a perfectly uniform vertical surface perpendicular to your worktop. This makes them ideal for positioning workpieces with rounded edge profiles, or when you need to align stacks of sheet goods for a single cut.
Without a large diameter collar, Chamfer Dogs are more compact and easier to store, yet offer the same capability.
Choosing the Right Fit
Like our line of traditional dogs, Chamfer Dogs are available in "Close Fit" sizes. Most 20mm dogs on the market feature a 19.90mm body, which fits well in the Festool® MFT/3 but can result in needless play when used with a worktop made by way of the Parf Guide System or precision CNC router. Instead, our "Close Fit" dogs feature a 19.99mm body providing a near zero clearance fit when inserted into a 20mm bench dog hole. While a snug fit is always going to yield the best results, there are situations where these dogs might be too tight depending on your work surface’s manufacturing variability and other factors such as shop humidity. For this reason, we also offer the small version of our Chamfer Dog in "Standard Fit," and alternatively you may consider the UJK Combined Chamfer & Reamer Tool to efficiently and very precisely enlarge your dog holes for the perfect fit.
Available in Four Sizes
Chamfer Dogs are available in four sizes, distinguished by their height above the work surface:
- Small Dogs: Suitable for a majority of bench dog positioning applications, projecting 10mm (0.39 in) above the worktop.
- Stubby Dogs: Our medium-sized dog is coined "stubby" because it's just short enough to fit underneath a fully-plunged Festool® TS55 track saw, where the motor housing would otherwise interfere with taller dogs. If you're planning to use dogs in conjunction with UJK Dog Rail Clips to attach a guide rail to your 20mm worktop, this is the best option so long as you're cutting materials 25mm (1 in) or less in thickness.
- Tall Dogs: Standing 80mm (3.15 in) proud of the worktop, these dogs are suitable for precisely locating stacks of sheet goods where a large uniform vertical surface is needed. When used in conjunction with UJK Dog Rail Clips to attach a guide rail to your 20mm worktop, Tall Dogs also afford the maximum flexibility in material thickness you can cut. They're the best option if you’re frequently cutting materials 25mm (1 in) or larger in thickness.
Don't Forget to Chamfer!
To get the full benefit of Chamfer Dogs, you must use them in chamfered 20mm dog holes. We offer a Hand Chamfer Tool suitable for adding this chamfer to MDF/HDF worktops, as well as a Combined Chamfer & Reamer Tool which adds the chamfer while also enlarging your dog holes with uniform precision. For hardwood veneered plywood, a quality 45° chamfer router bit will make quick work of chamfering your dog holes. Chamfering your work surface holes provides another added benefit: by removing the hard edges, you reduce the likelihood of pinching a finger. (Not that it's ever happened to us.)
- M8 SpeedKnobs™ - All Chamfer Dogs except our "Standard Fit" version include an M8x1.25 threaded hole to accept clamping knobs like our M8 SpeedKnobs—far and away the fastest and easiest-to-secure knob we’ve ever tested.
- Combined Chamfer & Reamer Tool – Chamfer and expand your 20mm dog holes with maximum precision and speed.
- Hand Chamfer Tool – For hand-cutting the perfect chamfer in your MDF/HDF worktop or Festool MFT/3.
- Material: 6000 Series Aluminum Alloy, T6 Tempered
Got a suggestion to make this page even better? Your feedback and suggestions are always welcome!
Other DetailsTSO brand products are guaranteed for five years from date of sale against defects in materials or workmanship. Normal wear and tear and accidental damage are not covered. For any product determined to have a defect covered by this warranty, TSO Products will repair or, at its option, replace with current comparable product. Warranty requests require an RMA (return authorization number) prior to any return. Request an RMA number by contacting TSO Customer Service (firstname.lastname@example.org).
Videos Hide Videos Show Videos
5 Reviews Hide Reviews Show Reviews
Work quite well with shoulder that is milled into them.
Love this dog, they are precisely 20mm so they fit my table perfectly well. Well built.
This product works perfectly as advertised. I used the parf system to drill my 20mm holes, they fit perfectly. I do use a screw from underneath the work surface in order to clamp them into place just to ensure there is absolutely no movement.
Absolutely perfect fit for my mft's chamfered 20mm holes. I've come to expect nothing less from TSO!
Perfect as to not interfere with the track saw motor housing....
We are continually striving to improve our products based on customer input. While we make every attempt to keep our product pages up-to-date, know that the product you receive may reflect recent improvements and therefore differ slightly from the product depicted. We reserve the right to change specification of products without notice.