Stock Guides

JessEm Stock Guides: Consistent Pressure, Cleaner Cuts

A feather board holds stock against the fence, but it can drag on the surface and slow your feed rate. JessEm stock guides solve that problem. The unique guide rollers use one-way roller bearings that spin freely in the feed direction while locking against kickback. Grip force urethane rollers apply steady spring pressure without marring your workpiece, keeping wide boards and long boards flat against the fence from start to finish.

The result is a smoother feed, cleaner cuts, and an anti-kickback feature that adds a layer of protection at the router table or table saw. JessEm guides mount quickly to any T-slot or flat mounting surface, making setup fast and adjustment simple.

How JessEm Stock Guides Work

Each stock guide uses a pair of roller arms fitted with grip force urethane rollers. The rollers press against your workpiece at a slight angle, holding it firmly against the rip fence while allowing smooth forward feed. One-way roller bearings inside each roller let the stock move toward the blade or bit but lock instantly if the piece tries to kick back.

Spring pressure is adjustable, so you can dial in the right amount of force for thin stock, wide boards, or sheet goods. The guides mount to a T-slot track or directly to a flat mounting surface using common hardware. Setup takes minutes, and repositioning for different cuts is quick and repeatable.

Which Stock Guide Fits Your Setup?

Clear-Cut TS Stock Guides

Clear-Cut TS Stock Guides — The full system for table saw use. Includes a dedicated mounting assembly designed to integrate with your table saw’s rip fence. Best for woodworkers who want a permanent, dialed-in setup with quick adjustment between cuts.

Clear-Cut Stock Guides

Clear-Cut Stock Guides — The standard pair for router tables and table saws with T-slot tracks or flat mounting surfaces. A versatile option that works across multiple machines.

Clear-Cut FLEX Stock Guides

Clear-Cut FLEX Stock Guides — A more compact, flexible option designed for compact setups such as jobsite table saws or where clearance is limited. Same roller technology, smaller footprint.

Shop Made Fence Mounting Kit

Shop Made Fence Mounting Kit — Hardware kit for mounting Clear-Cut Stock Guides to a shop-built or non-standard fence. Useful if your fence doesn’t have T-slots or pre-drilled mounting points.

CSC SYS 50 Rip Fence Bracket for Clear-Cut FLEX

CSC SYS 50 Rip Fence Bracket for Clear-Cut FLEX — A TSO-made bracket that lets you mount the FLEX guides directly to SYS 50 rip fences. If you’re running a SYS 50 setup, this adapter simplifies installation.

What Makes JessEm Clear-Cut Stock Guides Stand Out

• One-Way Roller Bearings: The heart of every JessEm guide is the one-way roller bearing system. These bearings allow free rotation in the feed direction but lock solid against reverse motion, providing an effective anti-kickback feature that keeps your hands safer and your workpiece under control.
• Grip Force Urethane Rollers: The urethane rollers grip without scratching or denting your stock. They conform slightly to the surface for even pressure across the full width of the roller arm, helping keep long boards and wide boards from drifting away from the fence.
• Effortless Setup: JessEm guides mount to standard T-slot tracks found on most router tables, table saws, and aftermarket fences including Incra systems. A T-25 torx screwdriver and a few minutes are all you need to get started.
• Consistent Control: Steady spring pressure and locked roller bearings give you predictable feed rates. That control translates to cleaner cuts, less burning, and more confidence when running stock through the blade or bit.