M5 Star Grip Knob Set
An easy, tool-free way to attach your TPG Adapter
If a tool-less attachment of TPG Adapters to your guide rails is preferred, as some customers have told us, these optional M5 Star Grip Knobs can be used in most situations. Note that if you are using a TS55 track saw with these knobs, plunge cuts deeper than 1.5 inches (38mm) will require switching back to the standard M5 flathead screws to avoid interference with the TS55 track saw motor housing and/or batteries. We have tested these knobs with the TS75 EQ and have confirmed these knobs don't interfere, even on full plunge cuts. A friendly customer also confirmed that his Makita XPS01PTJ cordless track saw achieved nearly 46mm of cut depth before touching the knobs; a loss of 5mm in total cut depth. If you are using another track saw, verify you have at least 11/16" (~18mm) of clearance between the top of the TPG Adapter and the bottom of your track saw motor housing when fully plunged.
Other DetailsTSO brand products are guaranteed for five years from date of sale against defects in materials or workmanship. Normal wear and tear and accidental damage are not covered. For any product determined to have a defect covered by this warranty, TSO Products will repair or, at its option, replace with current comparable product. Warranty requests require an RMA (return authorization number) prior to any return. Request an RMA number by contacting TSO Customer Service (firstname.lastname@example.org).
Videos Hide Videos Show Videos
1 Review Hide Reviews Show Reviews
We are continually striving to improve our products based on customer input. While we make every attempt to keep our product pages up-to-date, know that the product you receive may reflect recent improvements and therefore differ slightly from the product depicted. We reserve the right to change specification of products without notice.