GRS-16 Series Upgrade Drill Fixture for early tools
Available only at TSOProducts.com
If you are the owner of an early GRS-16 Guide Rail Square which did not come with the M6 accessory mounting hole pattern, you can catch up and add them yourself with the help of this Drilling Fixture.
CNC machined of solid aluminum the fixture features a rabbet providing the alignment edge while the ends of the fixture are machined to serve as a side reference for either edge of GRS-16 PE and, of course, for the GRS-16.
There’s more: if you have a PTR-18 Triangle, you can use this same fixture to drill and tap the accessory mounting holes found on the MTR-18 Triangle. More later on the wider range of accessories connecting with these mounting holes.
What's included in the box
- GRS-16 Series Upgrade Drill Fixture
- (5mm Tap Drill and M6.0x1.00 Tap not included)
- Dimensions: 8.286 x 1.00 x .50 inches
- Weight: 0.23 LB.
- Material: 6061-T6 aluminum, CNC machined finish
Worldwide shipping available to all destinations outside the United States
Got an idea to make this page even better? Your feedback and suggestions are always welcome!
TSO Products reserves the right to change specification of products without notice. Standard equipment and specifications may differ from country to country. Some products published here may not be sold in your country. Printed materials may not be current, so always check the TSO Products website for the most up-to-date product information.
FESTOOL is a Trademark of FESTOOL Tool Technic Tanos.
GRC-12™ TSO Products, LLC.
All Rights Reserved © 2019
2 Reviews Hide Reviews Show Reviews
I clamped the drill fixture to the guide rail square.
Using a 5 mm drill bit in a cordless hand drill, I marked each hole position with the drill bit.
I then removed the clamp and the drill fixture and finished drilling the holes on a drill press.
I tapped them with a 6 mm spiral tap in a cordless drill.
Pretty simple and fast.
Nice little jig, worked as advertised. I used a transfer punch to spot the holes before drilling rather than just using the drill in the hole.