Narrow Stock Pro - Rip Cutting System

Make Narrow Cuts with Track Saw Precision

Track saws aren’t designed for narrow cuts—and that becomes obvious fast. With no support under the guide rail, it tends to sag or tilt under the weight of the saw. And when your workpiece is narrower than the guide rail itself, there’s no good way to register your cut. Narrow Stock Pro solves both problems at once, with two Guide Rail Supports to prevent tipping or deflection, while two precision Gage Bars extend under the guide rail from the left to create a reliable fence that makes narrow cuts not just possible—but repeatable and dead accurate.

Designed to reliably cut stock narrower than the guide rail itself, Narrow Stock Pro makes it easy to tackle face frames, edge banding, trim pieces, drawer parts, spacer blocks, and more. It’s the next best thing to a cabinet saw or bandsaw—compact, accurate, and ready to go wherever your track saw takes you.

Use Narrow Stock Pro on...

• Festool MFT/3: Narrow Stock Pro shines when paired with a 20mm hole-pattern bench like the MFT/3. With your guide rail fixed in place and easily height-adjustable, you can quickly set the Gage Bars and enjoy repeatable cuts with ease.
• Custom 20mm Benches: Building your own workstation or using another commercial 20mm bench? Narrow Stock Pro pairs beautifully with UJK Guide Rail Dogs, allowing you to lock your guide rail into a fixed position and make identical narrow rips with zero fuss.
• Portable Cutting: No bench? No problem. Simply calibrate Narrow Stock Pro to your guide rail, adjust the height of each foot to match your material thickness, and set up on a sheet of rigid insulation foam, sacrificial MDF, or whatever flat surface your project demands.

See It In Action

Key Features

• Accurate: Two CNC-machined precision Gage Bars position your workpiece underneath your guide rail precisely where you want it.
• Fully Supported: The complete kit comes with two Guide Rail Support which keep your guide rail flat and deflection-free, even when there's no material underneath it. Additional Guide Rail Supports can be purchased in pairs to support longer guide rails, or for support before and after the cut.
• Fast: Calibrate it to your guide rail only on initial use. That means less setup time and more time making consistent, repeatable cuts.
• Compact: Easier to set up and store than full parallel guides, but just as precise. The entire kit is small enough to store in a Systainer (Custom Foam Systainer Insert available separately).
• Adjustable for Deeper Cuts, Too: Supports workpiece thickness up to 1.5" by replacing the comfort grip knob with an included flathead screw, and reversing the mounting brackets.

What's Included - Complete Set

• 2 qty. Gage Bars
• 2 qty. Guide Rail Supports
• 4 qty. Flathead Screws

What's Included - Gages Only

• 2 qty. Gage Bars
• 2 qty. Flathead Screws

Documentation

• Narrow Stock Pro Rip Cutting System User Guide (PDF)

Specifications

• Compatible Track Saw Systems: Festool, Makita, Milwaukee, RIDGID, Kreg ACS, Powertec, and Eastvolt track saw guide rails
• Material: 6061-T6 and 5052-H32 aluminum, blue anodized finish
• Hardware: Stainless steel