Click here to see Hans demonstrate the TPG Quick Adapter, one-time adjustment, and how it compares to the original TPG Adatper.
The TPG Quick Adapter performs the same function as our Original TPG Adapter, with the added option of even faster setup and removal thanks to its included tool-less quick attachment feature.
Our TPG Quick Adapters represent an economical and reliable means to connect TPG System T-tracks to your Festool guide rail. Compatible with all TPG T-tracks (both right- and left-hand), the TPG Quick Adapter connects using the M6 Comfort Grip Star Knobs and CNC-Machined Centering Spacers included with each TPG-30 and TPG-30/50 Set. It will not interfere with track saw plunge cuts, and can be easily moved along the guide rail once properly configured. Once placed on your guide rail, the TPG Quick Adapter can be fine-tuned by adjusting the two "zero clearance adjustment" screws to eliminate unwanted play; this procedure only has to be performed during first use. When a more permanent attachment is desired, the TPG Quick Adapter can be secured to your guide rail with the included torpedo nut and top-mounted M5 flathead screws, just like the Original TPG Adapter. All adjustments can be made with a 3mm Ball Hex Driver (included in the TPG-30 and TPG-30/50 Sets).
The TPG System can utilize TPG Adapters and/or GRS-16 Guide Rail Squares for connecting T-tracks to guide rails. While the GRS-16 is more expensive, you may want to consider at least one GRS-16 in your TPG kit because it enables the patent-pending ability to square and parallel in a single cut, using just one T-track—whereas the TPG Adapter will only ensure your cuts are parallel.
Note: Previous versions of our TPG Adapter included Comfort Grip Knobs and Centering Spacers, along with a 3mm Ball-Hex Driver. These accessories are now included in the TPG-30 and TPG-30/50 Sets, and no longer included with each TPG Adapter. The Knob Set with Centering Spacers can still be purchased as a standalone accessory.
TPG Quick Adapter - Initial Setup for Quick Use
- Remove nutplate. Uninstall the nutplate by removing the two flathead screws at the top of the TPG Quick Adapter body, and set aside.
- Drop it in. Place the TPG Quick Adapter anywhere along the guide rail T-slot (in lieu of sliding it in).
- Adjust zero clearance screws. With the TPG Quick Adapter head dropped over the guide rail T-slot, use a 3mm Hex Driver (included in the TPG-30 and TPG-30/50 Sets) to turn the two "zero clearance adjustment" screws clockwise until they lightly touch the guide rail.
- Fine tuning. Carefully back off the adjustment screws just enough that you can lift and replace the TPG Quick Adapter, but not so much that you have play between the adapter and guide rail. You should not have to repeat this adjustment procedure for subsequent use on Festool guide rails of the same profile; the adjustment screws feature thread locking compound to prevent unintended movement over time under normal use.
What's Included in the Box
- 1 qty. TPG Quick Adapter
Got a suggestion to make this page even better? Your feedback and suggestions are always welcome!
Other DetailsTSO brand products are guaranteed for five years from date of sale against defects in materials or workmanship. Normal wear and tear and accidental damage are not covered. For any product determined to have a defect covered by this warranty, TSO Products will repair or, at its option, replace with current comparable product. Warranty requests require an RMA (return authorization number) prior to any return. Request an RMA number by contacting TSO Customer Service (email@example.com).
Videos Hide Videos Show Videos
7 Reviews Hide Reviews Show Reviews
Machining is amazing. I have a couple of these and a GRS-16PE. I can switch between attaching a rail to either the 16PE or one of these adapters and the flip stop calibration measurement stays the same, pretty impressive. What you will discover is there is quite a bit of variation in Festool guide rails, if you were not aware already. I have a couple different lengths of rails and the "rib" that this fastens to is not the same dimension between them, one is tight the other is loose. If you switch between rails you have to compensate. It's a Festool problem, different review, different product, rather annoying. Too bad TSO does not make guide rails.
So far these work great. However, I'm still waiting to purchase and install their Parallel Guide System. I did take a chance purchasing these knowing that I have a Kreg Guide Rail. After figuring out the details/comparisons with the Kreg and Festool guide rails I purchased this and they work/fit great!
So far so good with the adapters. I've been able to hook these up to my Festool track and cut accurately with my Track Saw, which I'm always striving for.
Either way - directly attached to the guide rail or using the Quick Adapter connection feature, these are the smallest and most light weight option available in the market.
If you buy the TPG Parallel Guide System then buy the quick guide rail adapter to go with it. It enables the guide rail to just slot on and off with ease without having to wonder where you left your screwdriver (which is needed for the original adapter). Beautifully made in stunning blue and super quick delivery from TSO.
I was going to purchase the original adapter and add thumb screws to the top in order to make it "tool-less" but then came across these. These can be used with the screws as the original or can be used without the screws/t-nut and attach with the simple pressure of the soft nylon screws. I've set mine so they're snug without being overly snug which could wear out the nylon soft tip screw. They slide on easy, do not fall off, and come off easily ... I'm very pleased with this product.
makes using my TSO products a breeze, highly machined and blue so i can spot them all the way across the shop
We are continually striving to improve our products based on customer input. While we make every attempt to keep our product pages up-to-date, know that the product you receive may reflect recent improvements and therefore differ slightly from the product depicted. We reserve the right to change specification of products without notice.