UJK Parf Guide System Mark II

UJK Parf Guide System MK II Create your own custom 20mm worktops in record time For an excellent tutorial, read How to Build a Power Tool Table from Axminster Tools & Machinery. Good news: the UJK Parf Dust Port is now included as standard with each...

UJK Parf Guide System Case with Foam Insert

Protect your investment before it's too late. Watch this video for a demonstration by none other than Mr. Parfitt himself! Everything in its place and a place for everything (well nearly). This UJK branded T-LOC Systainer3 case comes with pre-cut high...

UJK Chamfer Tool

Designed and intended for use on MDF and HDF material; not recommended for hardwood veneer plywood. UJK Parf Chamfer Tool Enables full use of the Parf Super Dog, plus helps protect your 20mm worktop holes This specially designed chamfer cutter tool...

UJK Combined Chamfer & Reamer Tool

Two tools in one, for crafting 20mm worktops The Parf System relies on the fine tolerance fit between the dog holes and the dogs—neither too tight or too loose. Changes in humidity can make it difficult to insert or remove 20mm dogs. Machined from...

UJK Parf System Reamer for 20mm Holes

NOTE: This reamer requires a drill with a 3/8" chuck. The beauty of the Parf system lies in its accuracy, in particular the close fit of Parf dogs and accessories in the 20mm dog holes. Depending on the material chosen for the bench top, sometimes a...

UJK Parf Revision Dogs

UJK Parf Revision Dogs Expand an existing Parf grid pattern Watch the Parf Revision Dogs video to see how these dogs can be used to expand an existing multifunction table grid pattern. The Parf Revision Dogs are a set of three specialized aluminum dogs...

UJK Parf Dust Port

Good news: the UJK Parf Dust Port is now included as standard with each UJK Parf Guide Drilling System Mark II. There is no need to order it separately. The UJK Technology Parf Dust Port firmly attaches to the Parf Guide Block (part B). This...

UJK 20mm Cutter & Split Stop Collar for Parf Guide System

This cutter bores an exact 20mm hole as required by the Parf Guide System. The distinctive design ensures an exceptionally clean hole. This 20mm cutter & split stop collar will help you produce dozens of Parf Guide bench tops. It has tungsten...

3mm Pins for Parf Guide System

These are the 3mm guide pins as supplied with the original UJK Parf Guide System and the UJK Parf Guide System Mark II. They are used to accurately locate the UJK Parf Guide Sticks when carrying the preliminary drilling for the grid of holes when...