null
TSO Products

TDS-10 Dog Stops for 20mm Worktops

(22 reviews) Write a Review
SKU:
61-418 A
  • Affix positioning of workpieces with repeatable precision for easy mortising with the Festool Domino Joiner.
  • TDS-10 includes two anodized aluminum stops, four bench dogs, and four M8 SpeedKnobs.
  • Once secured, TDS-10 DogStops can be removed from the worktop while retaining their exact positioning for further use.
  • Precision crafted from anodized aluminum and featuring our DoubleGroove Dogs and M8 SpeedKnobs.
  • Use the TDS-10 DogStops to precisely align workpieces for repeatable cuts with the track saw.
$149.95

Description

Infinite & Repeatable Positioning for 20mm Worktops

The Festool® MFT/3 multifunction table popularized the 20mm hole pattern, and for good reason: this hole pattern gives you flexibility in mounting bench dogs, clamps and other accessories, while keeping the table rigid and flat. But this design also has its drawbacks. Dogs could only be stopped 96mm apart with no choice in between. And horizontal clamps, cams or wedges work fine once—but cannot provide repeated accurate stops for cutting multiple identical workpieces.

Our variable position TDS-10 Dog Stops™ put an end to this limitation. With the TDS-10 Dog Stops, you can now:

  • Measure just once and cut consistent, repeatable lengths on your MFT/3 or similar 20mm hole patterned worktable
  • "Save" this position to use again later; the TDS-10 retains its position so long as you keep the SpeedKnobs secured
  • Cut floating tenons off the edge of your worktable with the Festool Domino joiner while these workpieces are securely stopped
  • Square cabinet door and drawer frames quickly
  • Securing workpieces for sanding (at just 1/2" or 12.7mm thick, the TDS-10 is perfect for use with sanding 3/4" sheetgoods)

How the TDS-10 Works

“I absolutely love the dog stops. Cutting ten side panels for five cabinet boxes, I only made one measurement. When I stacked the ten panels next to each other, you could not even feel with your fingernails where one panel ends and the next one begins.”
- TSO Beta Tester

Even the best cutting table requires some form of a material stop for controlling part length. For fine woodworking, consistent cut length is essential. Often more important than any dimension. Most projects call for two or more parts to be of the same width and length. Easier said than done! One thing is certain: measuring is not the answer when it comes to consistent part size. Measuring is how you establish the size of your first piece. But continuing to measure for the remaining pieces is a recipe for disappointment. That's why experienced woodworkers use some form of stop to control length of cut, a technique common with miter saw tables in particular.

The TDS-10 are the first material bench stops designed specifically for 20mm hole-pattern worktops, offering infinitely and precisely repeatable position choices. Unlike conventional bench dogs, the TDS-10 Dog Stops are fully adjustable over (3) three 20mm holes on 96mm centers, yet they remain as solid as a rock when locked in place on the table. Simply measure and mark the first of your ripped-to-width pieces to the required dimension you need to duplicate. Place this piece against a pair of dogs oriented perpendicular to the guide rail. Then slide the piece under your guide rail until your mark lines up with the splinter guard. Before you do anything else, place one or two TDS-10 Dog Stops in the 20mm holes behind the edge of the work piece opposite the side being cut. Slide each TDS-10 Dog Stop against the back of the work piece and lock it down.

With your adjustment knobs securely locked, every subsequent piece you slide into place and cut will be the same length as the first piece you cut. When you have a different length to cut, TSO Dog Stops pop right out of their 20mm holes without loosening the knobs and will remain ready to duplicate your original cut length in an instant. Just drop the TDS-10 Dog Stops back in their original two dog holes and your length of cut will be identical to the previous pieces.

Teamwork: TDS-10 Meets the Festool Domino

The Festool Domino makes short and accurate work of mortising for loose tenon joinery. Mortising with the Domino goes quickly; it's the setup that takes time. Positioning the workpiece, clamping in place before making the mortises, unclamping and repeating the process with the next edge or surface... You can easily find yourself spending 10x more time with setup and clamping than you do mortising. A simple solution: deploy several TDS-10 Dog Stops and some conventional dogs to capture the work piece. Cut the required mortises in all identical pieces. Reposition for the remaining mortises, and you're done.

The TDS-10 is sold in pairs. It comes with a pair of DoubleGroove Small Dogs and a pair of M8 SpeedKnobs.

Documentation

View AllClose

Warranty & Returns

TSO brand products are guaranteed for five years from date of sale against defects in materials or workmanship. Normal wear and tear and accidental damage are not covered. For any product determined to have a defect covered by this warranty, TSO Products will repair or, at its option, replace with current comparable product. Warranty requests require an RMA (return authorization number) prior to any return. Request an RMA number by contacting TSO Customer Service (info@tsoproducts.com).
View AllClose

22 Reviews

  • 5
    Great for CNC work

    Posted by Michael on 7th Mar 2023

    I use these on my MFT formatted workbench but where they really shine is on my CNC that also had MFT spacing. These are great for keeping a workpiece from moving around and make for easy registering it parallel to the gantry. Highly recommended.

  • 5
    Excellent

    Posted by Henk Beekhuis on 7th Mar 2023

    Best way to fix workpiece I have used so far. Used it for planing, domino routing and really like it.

  • 5
    Excellent Functionality

    Posted by Jerry S on 1st Jul 2022

    Really good for setting up 45 deg cuts as well as consistent length cuts. Also great at assembly time. PLEASE MAKE LONGER OFFERINGS!!!

  • 2
    TDS-10 Dog Stops

    Posted by James on 14th Mar 2022

    Quality Okay Ordered online on a Saturday sent reply on Sunday to cancel but conveniently they said on Monday it had already shipped. My bad but after studying the item more I didn’t see where it would be much benefit.

  • 5
    TDS-10 Bench Dog Stops. 30 day review

    Posted by Samuel Perez on 26th Feb 2022

    It is exactly what I expected from TSO. Quality and superb performance. Easy to assemble and your using them in less than 10 minutes. The TDS-10s brace the item you are drilling, sanding, cutting without any slop, or damage to your project. A fantastic product. Best in the Market.

View AllClose